POLIBASIC AP – AE – AD
DESCRIPTION
APPLICATIONS
Treatment of drinking water and industrial process.
Wastewater treatment, specifically in physical-chemical treatments.
Sludge treatment, to improve the performance of centrifuges and press filters.
Industrial processes in paper mills, chemical industry, petrochemical industry, mineral treatment, etc.
OPERATION
AP VERSION – FOR POWDER POLYELECTROLYTE
The dilution water reaches the tank through the automated water collector. The polyelectrolyte powder, stored in the hopper of the dispenser, is extracted by means of a special screw and discharged on the dispersion cone of a water nozzle.
The obtained mixture falls by gravity into the first compartment and then passes through siphons to the second and third. The first and second compartments have stirrers, and optionally the third one as well.
The volume of the compartments and the continuous action of the stirrers ensures a homogeneous mixture and a suitable retention time for a good dilution.
The distribution panel and control panel are responsible for operating the entire system automatically, ensuring correct dosing and preparation.
AE VERSION – FOR LIQUID POLYELECTROLYTE
The preparer model POLIBASIC AE has a similar operation, but it is designed for operation with liquid polyelectrolyte.
In this case, the dispenser is supplanted by a special pump for liquids of high viscosity.
AD VERSION – FOR POWDER AND LIQUID POLYELECTROLYTE
CONSTRUCTIVE CHARACTERISTICS
Automatic water supply system formed by isolating valve, filter, pressure switch, pressure gauge, pressure reducer, solenoid valve, regulating valve, pulse emitter flowmeter, and dispersion nozzle.
Tanks made entirely of polypropylene PPH.
The tanks have three compartments, except for model 5, which has two, and all have inspection covers and a drain connection in each compartment.
Optimized design propellers for a homogeneous mix, made of AISI 316 stainless steel.
Volumetric doser built from the material of the deposit and provided with a dosing screw specially designed for working with polyelectrolyte.
Electrical panel for protection and control, with manual selectors, prepared for manual or automatic operation, equipped with emergency stop and wiring to all the elements of the equipment.
Heating resistance and methacrylate peephole in dust discharge tube.
Inductive level sensor for high, low, very low and very high level, with warning signal.
OPTIONAL ELEMENTS
– Vault breaker vibrator.
– Minimum level sensor in the hopper of the powder dispenser or liquid tank.
– Prefabricated post dilution units.
– Stirrer in the third compartment.
ADVANTAGES
– Considerable saving of polymer.
– Accuracy in preparation and dosing, optimizing treatments.
– Space saving and centralized installation.
Product ranges
TECHNICAL DATA
TECHNICAL DATA
POLIBASIC
AP-AE-AD
5
8
12
20
30
40
60
80
100
production
nominal (l/h)
550
850
1.200
2.000
3.000
4.000
6.000
8.000
10.000
Volume
(l)
650
1.000
1.300
2.120
3.210
4.320
6.265
8.400
11.300
A
(mm)
1.000
1.000
1.000
1.000
1.000
1.400
1.600
1.600
2.100
(mm)
1.200
1.700
1.700
2.200
3.200
3.200
3.200
4.200
4.200
(mm)
1.550
1.550
1.790
1.950
1.950
2.050
2.400
2.400
2.400
Water
1/2″
1/2″
1/2″
3/4″
1″
1″
1 1/2″
1 1/2″
1 1/2″
Pump
1 1/2″
1 1/2″
1 1/2″
2″
2″
2″
2″
2″
2″
Emptying
1″
1″
1″
1″
1″
1″
1″
1″
1″
Overflow
1 1/2″
1 1/2″
1 1/2″
2″
2″
2″
2″
2″
2″
(Kg)
145
160
200
265
380
560
710
835
1.150
The use of photos, data or texts from these catalogues is not permitted without the prior written authorization of Politech.